553 lines
12 KiB
Diff
553 lines
12 KiB
Diff
From ddb6cde1cf59eb57820a6c277b8b5cff45e68d68 Mon Sep 17 00:00:00 2001
|
|
From: Tianling Shen <cnsztl@gmail.com>
|
|
Date: Sat, 6 May 2023 14:11:07 +0800
|
|
Subject: [PATCH] arm64: dts: rockchip: Add Lunzn Fastrhino R66S
|
|
|
|
Lunzn Fastrhino R66S is a high-performance mini router.
|
|
|
|
Specification:
|
|
- Rockchip RK3568
|
|
- 1/2GB LPDDR4 RAM
|
|
- SD card slot
|
|
- 2x USB 3.0 Port
|
|
- 2x 2500 Base-T (PCIe, r8125b)
|
|
- 12v DC Jack
|
|
|
|
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
|
|
Link: https://lore.kernel.org/r/20230506061108.17658-2-cnsztl@gmail.com
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
.../boot/dts/rockchip/rk3568-fastrhino-r66s.dts | 27 ++
|
|
.../boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi | 484 +++++++++++++++++++++
|
|
3 files changed, 512 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
@@ -56,5 +56,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sa
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
|
|
@@ -0,0 +1,27 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+
|
|
+#include "rk3568-fastrhino-r66s.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Lunzn FastRhino R66S";
|
|
+ compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
|
|
+
|
|
+ aliases {
|
|
+ mmc0 = &sdmmc0;
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdmmc0 {
|
|
+ bus-width = <4>;
|
|
+ cap-mmc-highspeed;
|
|
+ cap-sd-highspeed;
|
|
+ disable-wp;
|
|
+ max-frequency = <150000000>;
|
|
+ no-sdio;
|
|
+ no-mmc;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
+ vmmc-supply = <&vcc3v3_sd>;
|
|
+ vqmmc-supply = <&vccio_sd>;
|
|
+ status = "okay";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
|
|
@@ -0,0 +1,484 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+
|
|
+/dts-v1/;
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+#include <dt-bindings/leds/common.h>
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
+#include <dt-bindings/soc/rockchip,vop2.h>
|
|
+#include "rk3568.dtsi"
|
|
+
|
|
+/ {
|
|
+ chosen: chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&reset_button_pin>;
|
|
+
|
|
+ button-reset {
|
|
+ debounce-interval = <50>;
|
|
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
+ label = "reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&status_led_pin>;
|
|
+
|
|
+ status_led: led-status {
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
+ function = LED_FUNCTION_STATUS;
|
|
+ gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ dc_12v: dc-12v-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "dc_12v";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <12000000>;
|
|
+ regulator-max-microvolt = <12000000>;
|
|
+ };
|
|
+
|
|
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_pcie";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&vcc5v0_sys>;
|
|
+ };
|
|
+
|
|
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&dc_12v>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ vin-supply = <&dc_12v>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_usb_host";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ enable-active-high;
|
|
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
|
+ regulator-name = "vcc5v0_usb_otg";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ };
|
|
+};
|
|
+
|
|
+&combphy0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&combphy1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu1 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu2 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&cpu3 {
|
|
+ cpu-supply = <&vdd_cpu>;
|
|
+};
|
|
+
|
|
+&gpu {
|
|
+ mali-supply = <&vdd_gpu>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+
|
|
+ vdd_cpu: regulator@1c {
|
|
+ compatible = "tcs,tcs4525";
|
|
+ reg = <0x1c>;
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
+ regulator-name = "vdd_cpu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <800000>;
|
|
+ regulator-max-microvolt = <1150000>;
|
|
+ regulator-ramp-delay = <2300>;
|
|
+ vin-supply = <&vcc5v0_sys>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rk809: pmic@20 {
|
|
+ compatible = "rockchip,rk809";
|
|
+ reg = <0x20>;
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
+ #clock-cells = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int>;
|
|
+ rockchip,system-power-controller;
|
|
+ vcc1-supply = <&vcc3v3_sys>;
|
|
+ vcc2-supply = <&vcc3v3_sys>;
|
|
+ vcc3-supply = <&vcc3v3_sys>;
|
|
+ vcc4-supply = <&vcc3v3_sys>;
|
|
+ vcc5-supply = <&vcc3v3_sys>;
|
|
+ vcc6-supply = <&vcc3v3_sys>;
|
|
+ vcc7-supply = <&vcc3v3_sys>;
|
|
+ vcc8-supply = <&vcc3v3_sys>;
|
|
+ vcc9-supply = <&vcc3v3_sys>;
|
|
+ wakeup-source;
|
|
+
|
|
+ regulators {
|
|
+ vdd_logic: DCDC_REG1 {
|
|
+ regulator-name = "vdd_logic";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_gpu: DCDC_REG2 {
|
|
+ regulator-name = "vdd_gpu";
|
|
+ regulator-always-on;
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
+ regulator-name = "vcc_ddr";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_npu: DCDC_REG4 {
|
|
+ regulator-name = "vdd_npu";
|
|
+ regulator-init-microvolt = <900000>;
|
|
+ regulator-initial-mode = <0x2>;
|
|
+ regulator-min-microvolt = <500000>;
|
|
+ regulator-max-microvolt = <1350000>;
|
|
+ regulator-ramp-delay = <6001>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8: DCDC_REG5 {
|
|
+ regulator-name = "vcc_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda0v9_image: LDO_REG1 {
|
|
+ regulator-name = "vdda0v9_image";
|
|
+ regulator-min-microvolt = <950000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda_0v9: LDO_REG2 {
|
|
+ regulator-name = "vdda_0v9";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdda0v9_pmu: LDO_REG3 {
|
|
+ regulator-name = "vdda0v9_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_acodec: LDO_REG4 {
|
|
+ regulator-name = "vccio_acodec";
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_sd: LDO_REG5 {
|
|
+ regulator-name = "vccio_sd";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_pmu: LDO_REG6 {
|
|
+ regulator-name = "vcc3v3_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca_1v8: LDO_REG7 {
|
|
+ regulator-name = "vcca_1v8";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca1v8_pmu: LDO_REG8 {
|
|
+ regulator-name = "vcca1v8_pmu";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcca1v8_image: LDO_REG9 {
|
|
+ regulator-name = "vcca1v8_image";
|
|
+ regulator-init-microvolt = <950000>;
|
|
+ regulator-min-microvolt = <950000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ regulator-suspend-microvolt = <950000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_3v3: SWITCH_REG1 {
|
|
+ regulator-name = "vcc_3v3";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc3v3_sd: SWITCH_REG2 {
|
|
+ regulator-name = "vcc3v3_sd";
|
|
+
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pcie30phy {
|
|
+ data-lanes = <1 2>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie3x1 {
|
|
+ num-lanes = <1>;
|
|
+ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie3x2 {
|
|
+ num-lanes = <1>;
|
|
+ reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ gpio-leds {
|
|
+ status_led_pin: status-led-pin {
|
|
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pmic {
|
|
+ pmic_int: pmic-int {
|
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rockchip-key {
|
|
+ reset_button_pin: reset-button-pin {
|
|
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb {
|
|
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pmu_io_domains {
|
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
|
+ vccio1-supply = <&vccio_acodec>;
|
|
+ vccio3-supply = <&vccio_sd>;
|
|
+ vccio4-supply = <&vcc_1v8>;
|
|
+ vccio5-supply = <&vcc_3v3>;
|
|
+ vccio6-supply = <&vcc_1v8>;
|
|
+ vccio7-supply = <&vcc_3v3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ vref-supply = <&vcca_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&tsadc {
|
|
+ rockchip,hw-tshut-mode = <1>;
|
|
+ rockchip,hw-tshut-polarity = <0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_xhci {
|
|
+ dr_mode = "host";
|
|
+ extcon = <&usb2phy0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_xhci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0_host {
|
|
+ phy-supply = <&vcc5v0_usb_host>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy0_otg {
|
|
+ phy-supply = <&vcc5v0_usb_otg>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vop {
|
|
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vop_mmu {
|
|
+ status = "okay";
|
|
+};
|